|
Treatment of Lignin Wastewater Using Peroxydisulfate Combined with Manganese Oxide-Loaded Biochar |
|---|---|
| รหัสดีโอไอ | |
| Creator | 1. Glinsukol Suwannarat 2. Kemason Sontabam 3. Soraya Sawangying 4. Chompoonut Chaiyaraksa |
| Title | Treatment of Lignin Wastewater Using Peroxydisulfate Combined with Manganese Oxide-Loaded Biochar |
| Publisher | Thai Society of Higher Education Institutes on Environment |
| Publication Year | 2565 |
| Journal Title | EnvironmentAsia |
| Journal Vol. | 15 |
| Journal No. | 3 |
| Page no. | 143-151 |
| Keyword | Biochar, Lignin, Manganese oxide, Oxidation, Sodium peroxydisulfate |
| URL Website | https://tshe.org/main/ea-journal-online |
| Website title | EnvironmentAsia Journal |
| ISSN | 1906-1714 |
| Abstract | The pulp and paper industry wastewater discharge into public water, it will cause water pollution problems. In this research, lignin contaminated synthetic wastewater with a COD value of 2,401 mg/L, and color intensity of 5,432 ADMI was treated using 150 mM sodium peroxydisulfate in combination with MnOx-loaded biochar (MnOx-B). The MnOx-B was produced by pyrolyzing corn core at 400 ?C for 4 hours without oxygen, then dipped in 40 mM manganese sulfate for 2 hours, and heated at 600?C for 30 min without oxygen. From the characterization of MnOx-B, the surface area, pore volume, pore size, and pH value at the zero-point charges of MnOx-B were 153 m2/g, 0.054 cm3/g, 1.11 nm, and 7.23, respectively.From the FTIR spectrogram, the peak assigned to Mn-O was observed. By applying 150 mM sodium peroxydisulfate and varying three parameters: MnOx-B dosage, initial wastewater pH, and reaction time, to treat lignin wastewater, the optimum experimental condition was obtained using 2 mg/L of MnOx-B, under pH of 8 for 45 min. The COD and color removal efficiencies were 73% and 90%, respectively. However, the quality of the treated wastewater did not yet pass the pulp and paper mills effluent standards of the Department of Industrial Works. |
